Back to: Dedusting machines

Ariosa Mobile T1: Continuous dust collector

Through-feed dedusting machine on wheels

Through-feed dedusting machine on wheels, designed to remove the dust from leather and similar materials. It can be positioned in front of a spray tunnel, a roller coating machine, an ironing machine or behind a staking machine.

It is available in two versions, T1 and T2. T1 version has one blowing and suctioning head for the grain side while the T2 has one for the flesh side too. From the T1 version we developed the T1SP3200, a special blowing and suctioning head for the grain side to be positioned directly on the spreader belt at the entrance of a press.

Sectors

ARIOSA MOBILE T1 Macchina a depolverare in continuo su ruote

Depolveratrice Ariosa T1 in Continuo in linea su produzione

ARIOSA MOBILE T1 dettaglio 2 Macchina a depolverare in continuo su ruote

ARIOSA MOBILE T1 dettaglio 3 Macchina a depolverare in continuo su ruote

ARIOSA MOBILE T1 dettaglio 4 Macchina a depolverare in continuo su ruote

ARIOSA MOBILE T1 dettaglio 5 Macchina a depolverare in continuo su ruote

Sizes

Sizes: 1800 / 2200 / 2600 / 3200 / 3400

Approximate technical data

MODEL	MOBILE T1	18	22	26	32	34
Total Power	kW	0.25	0.25	0.37	0.37	0.37
Working Speed	m/min	3÷18	3÷18	3÷18	3÷18	3÷18
Air Volume in Suction	m3/h Kgf/m2	650	800	900	1150	1200
Net Weight	from N (kg)	580	620	660	720	740
Total Power BLOWER	kW	3	4	4	5.5	5.5
Blower Noise Level	dB (A)	73	75	75	77	77
Net Weight BLOWER	from N (kg)	41	53	53	61	61

Suction technical data

MODEL	ASPIRATOR	18	22	26	32	34
Total power	kW	1.1	1.1	1.5	3	4
Noise level	dB (A)	71	72	72	73	73
Net weight	from N (kg)	37	48	48	56	62
	COLLECTOR	CF1/SV	CF1/SV	CFS2	CFS3	CFS3
Net weight	from N (kg)	90	90	135	180	180

Technical drawings

disegno tecnico ARIOSA MOBILE T1 Macchina a depolverare in continuo su ruote

Think Green

Aware of its responsibilities, Bergi joined the “Supplier of Sustainable Technologies” project promoted by Assomac in 2017, with the aim of contributing to deepening the key issues related to the intelligent and conscious management of energy, water, and natural resources, with the perspective of qualifying the manufacturing industry’s production process as sustainable.

The focal point of the project is the “Green Label,” a voluntary declaration certifying the energy and environmental performance of machines, calculated based on internationally recognized parameters such as the CFP (Carbon Footprint, the amount of equivalent carbon dioxide emissions) measured using the shared and standardized Life Cycle Assessment (LCA) calculation methodology.