Back to: Automation and handling

Dynamic: Compact stacker for tanneries

Compact Traditional Stacker.

The BERTECH DYNAMIC stacker is built in two versions: one specific for the wet area and one for the dry area.

Built with high-quality materials, it has a solid and robust structure and is composed of components designed for use in tanneries. Its compact dimensions place it among the shortest in its category, while still featuring an inclined conveyor belt ramp ideal for any type of hide, without problems of rolling or slipping. BERTECH is the only manufacturer that equips its stackers, DYNAMIC and ARMLESS, as standard with the fall arrest system for the lifting group, an essential component for the total safety of the machine. Another feature that sets it apart is the usable working width, which is always equal to or greater than that described in the catalog.

Sectors

With DYNAMIC, you can easily handle any type of hide for the following operations:

  • After press in wet blue or continuous airing, onto a pallet;
  • After sammying in crust, onto a horse or board;
  • After manual grouting table, or continuously, onto a easel or board;
  • After grinding and dusting line, onto a pallet or board;
  • After the spraying line, onto a horse or board if working on still hides;
  • After continuous ironing and/or printing press, onto a easel or board if working on still hides.

The stacker is available in five versions:
XS = extra short: for ovine/caprine hides (carriage rope length 1600 mm);
S = short: for stacking onto a horse and table (carriage rope length 2000 mm);
M = medium: for stacking onto a horse, table, or pallet, for short hides (carriage rope length 2800 mm);
L = long: for stacking on any support (carriage rope length 3100 mm);
XL = extra long: for hides over 55 feet on any support (carriage rope length 3300 mm).

Sizes

Size: 2000/2200/2600/3200/3400/3600

Approximate technical data

MODELDYNAMIC2022263234
Installed PowerkW3.353.353.953.953.95
Machine Weightkg19502050220023002400
Overall Dimensionsmm3410 x
6000 x
2400 h
3650 x
6000 x
2400 h
4090 x
6000 x
2400 h
4610 x
6000 x
2400 h
4850 x
6000 x
2400 h
Transport Dimensionsmm3320 x
2170 x
2300 h
3650 x
6000 x
2400 h
4000 x
2170 x
2300 h
4520 x
2170 x
2300 h
4760 x
2170 x
2300 h

Main features
  • Direct drive motors;
  • Self-lubricating bearings, requiring minimal maintenance;
  • Sliding guides for the moving conveyor belt made of specific material to minimize friction and sliding noise;
  • Floor rails for quick machine movement;
  • "Touch screen" interface with clear and intuitive graphical representations to assist the operator in selecting the most suitable work program and identifying anomalies.
Optional accessories available upon request;
  • Automatic lifting of one or both arms supporting the moving conveyor belt, to facilitate unloading from the pallet with a forklift, preventing it from hitting against it;
  • Stainless steel conveyor belts for use in wet and corrosive environments;
  • Polypropylene electrical panel: corrosion-resistant;
  • Pneumatic piston for quick withdrawal of the stacker on wheels;
  • Longitudinal circular cutter (with laser pointer) to cut whole hides in half;
  • Additional belt with marker or stamper;
  • Single hide inspection device: remote button that unloads the hide at the end of the stroke instead of on the pallet;
  • Stop & Go: double overlapping fixed belts to double the working speed;
  • Double motorization of the fixed belt for aligning two hides side by side;
  • Double motorization of the fixed belt to straighten the front of the hide introduced sideways;
  • Markers and stampers.